Larger custom comic artwork for encapsulation + signature verification21447
Pages:
1
 Collector
|
Vmt8 private msg quote post Address this user | |
| I'm looking into sending in some new and older comics to be encapsulated and graded by CBCS, I have never used CBCS before I'm also looking into sending in 1x signed art print (Approx 9" x 11" in size) 1x custom signed artwork ( Approx 10" x 11" in size) Please see the attached photos. Is CBCS able to encapsulate and verify both my signed art print and custom signed artwork? If CBCS is not able to do this, is there a company that you can recommend? Please let me know, thank you   |
||
| Post 1 • IP flag post | ||
|
Collector
|
SpiderTim private msg quote post Address this user | |
| are you looking to have the signature verified by CBCS? Who is the artist on the artwork? | ||
| Post 2 • IP flag post | ||
|
Collector
|
Vmt8 private msg quote post Address this user | |
| Yes, I'm looking to have both the signature verified by CBCS and encapsulated by CBCS. The artist is Jo Chen. I personally witnessed her draw this artwork and sign it all for me in person, during a comic convention many many years ago |
||
| Post 3 • IP flag post | ||
|
Collector
|
SpiderTim private msg quote post Address this user | |
| yes, that is her signature as I have a Virgil sketch by her and the signature is the same. | ||
| Post 4 • IP flag post | ||
 Apparently, I am easily annoyed.
|
Rbolton private msg quote post Address this user | |
| @Vmt8 welcome to the forums, very cool prints! | ||
| Post 5 • IP flag post | ||
 Collector
|
radd76 private msg quote post Address this user | |
| @Vmt8 (CBCS MAGAZINE SLABS) can take no larger than 11.4” x 8.6” x 0.30” That first print might just fit as it looks to be barely over 8 1/2” (most likely letter size roughly and that could fit). I would recommend going to a show that CBCS is at and submitting at their booth if possible bc I’m not sure (other than “SLAB ONLY”) how they would do this when submitting thru the website. Also the fact that it’s not really “ART” (as in original art in regards to the print)- your 10” x 11” original art piece will not fit any slabs. There is a company called “CRAFTY COMICS” you can Google that makes acrylic enclosures if preserving / displaying is enough (as there is no signature verification with them)- or alternatively just framing the piece. dimensions below for the CBCS magazine holders: 13.7 "x 9.5" x 0.75" (outer) LARGEST inner well cavity: 11.4"x 8.6"x 0.30" |
||
| Post 6 • IP flag post | ||
|
Collector
|
Vmt8 private msg quote post Address this user | |
| Thank you very much! @radd76 I will look into this further, thanks!!! |
||
| Post 7 • IP flag post | ||
Pages:
1