Not a CBCS member yet? Join now »
CBCS Comics
Not a CBCS member yet? Join now »

Ask questions here without starting a new thread 2022 part 218057

I'm a McNugget guzzler. HeinzDad private msg quote post Address this user
Quote:
Originally Posted by KatKomics
@Jesse_O have a few of those somewhere? will give it a try!

@Byrdibyrd just a free design I found on thingyverse

got into old fashioned double edge shaving over christmas...next print job will be a travel case for a razor that fits inside an altoid case
From what I’ve found the flaws are in the free file. Not finishing it nicely after the fact. It is a sweet container though.
Post 226 IP   flag post
Masculinity takes a holiday. EbayMafia private msg quote post Address this user
What are the main materials that 3D printers work with? Plastic and rubber I assume?
Post 227 IP   flag post
-Our Odin-
Rest in Peace
Jesse_O private msg quote post Address this user
@EbayMafia resin is a big one for miniatures (like DND characters).
Post 228 IP   flag post
Suck it up, buttercup!! KatKomics private msg quote post Address this user
Quote:
Originally Posted by EbayMafia
What are the main materials that 3D printers work with? Plastic and rubber I assume?


think the library one is just some sort of plastic - you're not able to swap out type or colour -but hey - it's free!!

this one wasn't too bad, the caps seem to get maybe 1 thread on? they are secure - certainly enough for travel - would just like them to screw down a bit more.


I might try going back and printing the caps at 101% to see if that helps before I sand anything - would hate to sand it down a bit then mess it up
It took 2.5 hrs for the body to print and 1hr for the 2 caps!! just start it up and come back later - lucky for me the library in town is only a 15 minute walk and it was nice today so saved a car trip!
Post 229 IP   flag post
If I could, I would. I swear. DrWatson private msg quote post Address this user
Quote:
Originally Posted by HulkSmash
What would you value this ASM 361 at? Would you gladly pay 1/2 - 3/4 FMV or hard pass? It’s not mine just one I came across.



If there weren't a blue million of those books available, perhaps. However, as it stands, no.
Post 230 IP   flag post


If the viagra is working you should be well over a 9.8. xkonk private msg quote post Address this user
Quote:
Originally Posted by Paulbg2000
Quote:
Originally Posted by xkonk
@Paulbg2000 there's also 'slab only'. I don't think it's described much or at all on the website but it's an option when you create an order.


That's what I thought, but I couldn't see that option on the online order form.


Maybe there's some difference if you're going through the Canada site? I thought maybe you had to put in a signature first but no, the option comes up after I put in the comic info


Post 231 IP   flag post
The apple sauce and pudding were the best part... Bronte private msg quote post Address this user
Apparently a bunch of toys I just bought came with comics. Does anybody know if they are worth sending in to get graded? They are page puncher comics. And some toy from mcfarlane.



Post 232 IP   flag post
I'm a McNugget guzzler. HeinzDad private msg quote post Address this user
Oh boy. I’ve never seen that Constantine.
Post 233 IP   flag post
" . " Davethebrave private msg quote post Address this user
Quote:
Originally Posted by EbayMafia
What are the main materials that 3D printers work with? Plastic and rubber I assume?


Plastic/resin/metal.

In the classic car world they are useful for parts or components that don’t receive significant stress but are not readily available (metal) and for cosmetic/connectors (plastic).

The quality has improved materially over the last few years (pun intended).
Post 234 IP   flag post
Where's his Bat-package? Byrdibyrd private msg quote post Address this user
@Bronte
No lie, those are pretty cool.
Post 235 IP   flag post
Where's his Bat-package? Byrdibyrd private msg quote post Address this user
Quote:
Originally Posted by Davethebrave
Quote:
Originally Posted by EbayMafia
What are the main materials that 3D printers work with? Plastic and rubber I assume?


Plastic/resin/metal.

In the classic car world they are useful for parts or components that don’t receive significant stress but are not readily available (metal) and for cosmetic/connectors (plastic).

The quality has improved materially over the last few years (pun intended).

3D printers can also work with porcelain. I have a couple of crowns that were 3D printed at my dentist's office.
Post 236 IP   flag post
Collector Element_Lad private msg quote post Address this user
Ok, as a newbie still, I have the Free membership. I noticed "0 Points". What are points? Is this for members only? Does membership make much of a difference?
Post 237 IP   flag post
Where's his Bat-package? Byrdibyrd private msg quote post Address this user
@Element_Lad
I believe it's for members only. Unfortunately, I'm forgetting the rate at which the points accumulate.
Post 238 IP   flag post
The apple sauce and pudding were the best part... Bronte private msg quote post Address this user
@Byrdibyrd these toys are much different than the stuff I grew up with. Lots more detail. I haven't opened the boxes but they seem like they are more malleable than the toys of my generation. Granted I'm an d fart.
Post 239 IP   flag post
Where's his Bat-package? Byrdibyrd private msg quote post Address this user
@Bronte
Welcome to the Old Fart Club! Lots of us around, I'm sure.
Post 240 IP   flag post
I'll probably wake up constipated. Pre_Coder private msg quote post Address this user
Quote:
Originally Posted by Byrdibyrd
@Bronte
Welcome to the Old Fart Club! Lots of us around, I'm sure.

I'm probably 2nd oldest.
Post 241 IP   flag post
Suck it up, buttercup!! KatKomics private msg quote post Address this user
Why am I ok with the chipmunk raiding the bird feeder but not ok with the squirrel getting in on it too?

Post 242 IP   flag post
Collector* Towmater private msg quote post Address this user
Anyone know anything about the Batman vs Harley Quinn Battle Statue or collect statues that can chime in on it?

Walmart has the Batman vs Harley Quinn Battle Statue on clearance on their website through a vendor for 199.00. Looking around the internet it appears that’s a deal.

Post 243 IP   flag post
Please continue to ignore anything I post. southerncross private msg quote post Address this user

Post 244 IP   flag post
being an ass and being a clown are two very different things. HAmistoso private msg quote post Address this user
Quote:
Originally Posted by Towmater
Anyone know anything about the Batman vs Harley Quinn Battle Statue or collect statues that can chime in on it?

Walmart has the Batman vs Harley Quinn Battle Statue on clearance on their website through a vendor for 199.00. Looking around the internet it appears that’s a deal.



Giggle
Post 245 IP   flag post
Not trying to be an ass since February 12, 2020. HulkSmash private msg quote post Address this user
Worth getting graded? Yes and no.

My comic collector side says yes. Especially if they are high grade candidates. No matter what year a comic packaged with a toy is likely to suffer damages from packing let alone retail handling and bouncing around in transit.

My toy collector side says no! Don’t do it! As a whole they are more desirable as a complete and unopened package. On the other hand if you have plans for a diorama; there was never intent for preserving the “collectibility” of the figure/comic combo.

My Kickstarter Spawns came exceptionally well packed in foam inside of a box packed within another 1/2in thick box and I’m looking at possible 9.6s after a press. The defects are obviously from manufacturer handling. The intent was to display the figures and slab the comics rather than display unopened boxes that hide the figures.

Quote:
Originally Posted by Bronte
Apparently a bunch of toys I just bought came with comics. Does anybody know if they are worth sending in to get graded? They are page puncher comics. And some toy from mcfarlane.



Post 246 IP   flag post
If I could, I would. I swear. DrWatson private msg quote post Address this user
Quote:
Originally Posted by KatKomics
Why am I ok with the chipmunk raiding the bird feeder but not ok with the squirrel getting in on it too?


Squirrels are pests. Chipmunks are cute. Children fall into the same categories.
Post 247 IP   flag post
The apple sauce and pudding were the best part... Bronte private msg quote post Address this user
@HulkSmash

I have Kickstarter mcfarlane set unopened. I didn't even cut the tape. I'm afraid to devalue the toys. I'm stuck in collector mentality I'm comic more than toys guy, but it feels sacrilegious to open either.....
Post 248 IP   flag post
being an ass and being a clown are two very different things. HAmistoso private msg quote post Address this user
Quote:
Originally Posted by DrWatson
Quote:
Originally Posted by KatKomics
Why am I ok with the chipmunk raiding the bird feeder but not ok with the squirrel getting in on it too?


Squirrels are pests. Chipmunks are cute. Children fall into the same categories.



Post 249 IP   flag post
Not trying to be an ass since February 12, 2020. HulkSmash private msg quote post Address this user
Quote:
Originally Posted by Bronte
@HulkSmash

I have Kickstarter mcfarlane set unopened. I didn't even cut the tape. I'm afraid to devalue the toys. I'm stuck in collector mentality I'm comic more than toys guy, but it feels sacrilegious to open either.....
The figure package is a clamshell design that can be opened everything put back and closed again if that helps ease your conscience.
Post 250 IP   flag post
Where's his Bat-package? Byrdibyrd private msg quote post Address this user
@KatKomics
There may be a level of adorableness where the chipmunk ticks all the boxes and the squirrel comes up short.
Post 251 IP   flag post
" . " Davethebrave private msg quote post Address this user

Post 252 IP   flag post
Collector Element_Lad private msg quote post Address this user
Quote:
Originally Posted by Davethebrave



The Savagery! Henceforth we shall call Conan the Destroyer! By Crom!
Post 253 IP   flag post
Where's his Bat-package? Byrdibyrd private msg quote post Address this user
And yet the adorableness remains as Sir Chips brutalises the interloper! 'Get thee hence, feathered stealer of seeds!!'
Post 254 IP   flag post
I don't believe this....and I know you don't care that I don't believe this. GAC private msg quote post Address this user
Quote:
Originally Posted by Davethebrave



What am I seeing here? Is this Chipmunk eating another animal?!
Post 255 IP   flag post
619266 999 30