Mylar Suppliers16923
 Collector
|
AWES10 private msg quote post Address this user | |
| Has anybody else our there recently had difficulty finding Mylar bags? Everyone I used to buy eGerber products (Mylites 2 and Full Backs) are sold out with no idea when they will be back in stock. I recently found bags unlimited which has some reasonably priced Mylar bags, but their boards are like a 1/4 inch too short so I've been using BCW boards on top of their recommended board to prevent the books from getting caught on the edge of the board. Just curious if anybody else has been running into similar issues and what solutions and or suppliers they've found. |
||
| Post 1 • IP flag post | ||
 COLLECTOR
|
dielinfinite private msg quote post Address this user | |
| They’ve been harder to find since the demand for collectibles skyrocketed. You can still find them on ebay a bit more expensive than normal but not too outrageously so | ||
| Post 2 • IP flag post | ||
 Collector
|
Bobashek private msg quote post Address this user | |
| Yes, my comic store canceled my Full back order so I called egerber directly. They told me they weren't going to start getting stock until April but would not take a pre-order. It's super tough to get without paying scalper prices on ebay and amazon. | ||
| Post 3 • IP flag post | ||
 If the viagra is working you should be well over a 9.8.
|
xkonk private msg quote post Address this user | |
| https://forum.cbcscomics.com/topic/16307/page/1/e-gerber-disappointment/ Disappointed but not surprised to hear they don't expect boards back in stock until April now. I'm still planning on doing a group order when the opportunity is there. |
||
| Post 4 • IP flag post | ||
 Where's his Bat-package?
|
Byrdibyrd private msg quote post Address this user | |
| I happen to have dozens, possibly even hundreds, of 4 mil tab-top Mylars left over from when I swapped out my longboxes for short. The shortboxes are narrower so I had to re-bag a lot of the books. The Mylars are used, obviously, but would folks be interested in buying them? Of course, I won't sell any that are unsightly or damaged. If there's interest, it'll take me a few days to dig them up from wherever they ended up, so you'll have to bear with me. | ||
| Post 5 • IP flag post | ||
|
Collector
|
AWES10 private msg quote post Address this user | |
| Ok, so its not jus me, lol. Here is link for bags unlimited, I ve been using their 2mil Mylars and they are pretty good. https://www.bagsunlimited.com/category/137/comic-collection-supplies I tried their .040" backer boards and they are just too short, the comic is always coming off the board in one corner and when you fold the flap down the board is below the back of the bag so you are folding the bag and the flap in order to get a tight closure. clickable text Ive been spoiled by Mylar and cant go back to polypro on anything other than new releases, lol. |
||
| Post 6 • IP flag post | ||
 Collector
|
Darkseid_of_town private msg quote post Address this user | |
| I remember trying to warn people a year or so ago about this issue and E Gerber and being mocked and told I was wrong, to the extent I even brought one reseller into the forum to answer questions. People did not want to listen when told prices were rising fast, supply was a problem and it was headed towards a crisis. oh well..... | ||
| Post 7 • IP flag post | ||
 Collector
|
BrianGreensnips private msg quote post Address this user | |
| @Darkseid_of_town I remember and agree with you. I am so glad I bought 1000 Mylite 2 Standard size bags awhile back. | ||
| Post 8 • IP flag post | ||
|
Collector
|
Bobashek private msg quote post Address this user | |
Quote:Originally Posted by BrianGreensnips Do you use boards too or just the mylars? |
||
| Post 9 • IP flag post | ||
 Collector
|
50AE_DE private msg quote post Address this user | |
| I received an email this morning from bcemylar saying they're receiving their orders in March and they're accepting preorders. | ||
| Post 10 • IP flag post | ||
|
Collector
|
50AE_DE private msg quote post Address this user | |
| They also sent coupon codes. DISCOUNT COUPONS. SAVE UP TO $500.00 $ 5.00 discount on any order over $50.00 excluding freight is S00522053 $ 10.00 discount on any order over $100.00 excluding freight is S01022053 $ 50.00 discount on any order over $500.00 excluding freight is S05022053 $100.00 discount on any order over $1,000.00 excluding freight is S10022053 $200.00 discount on any order over $2,000.00 excluding freight is S20022053 $300.00 discount on any order over $3,000.00 excluding freight is S30022053 $500.00 discount on any order over $5,000.00 excluding freight is S50022053 |
||
| Post 11 • IP flag post | ||
|
Collector
|
Bobashek private msg quote post Address this user | |
| What is their website? | ||
| Post 12 • IP flag post | ||
 Collector
|
steveinthecity private msg quote post Address this user | |
Quote:Originally Posted by Bobashek https://bcemylar.com/sleeves.cfm |
||
| Post 13 • IP flag post | ||
 Collector
|
etapi65 private msg quote post Address this user | |
Quote:Originally Posted by Darkseid_of_town i remember reading that thread and thinking...why are they even arguing this point; there's clear evidence of supply shortages and distribution slow-downs. Also, I said I'd stop buying non-mylars...I bought 3000 bags board and the way the quantities worked out ended up with an additional 1000 boards figuring I'd just order uneven the next time around. Now I can't get bags. Just didn't have the money to put towards this at the time. |
||
| Post 14 • IP flag post | ||
 I'm waiting.... (tapping fingers).Splotches is gettin old! |
Nuffsaid111 private msg quote post Address this user | |
| Supply issues? Here in the U.S.? You guys are just imagining things now.  |
||
| Post 15 • IP flag post | ||
 Collector
|
sleeperbat private msg quote post Address this user | |
| Comic Pro line has good backing boards, 56pt. and they their OPP bags are a good substitute when Mylar is unavailable. | ||
| Post 16 • IP flag post | ||
|
Collector
|
BrianGreensnips private msg quote post Address this user | |
Quote:Originally Posted by BobashekI use boards too. I usually use their Half backs and Full backs however I had bought a ton earlier in the year for my better books. For anything under about a $20 book, I use cheaper boards from Matt's Baseball. They work well IMO. The Mylar really makes them pop especially when I am setting up at shows. |
||
| Post 17 • IP flag post | ||
 Collector
|
cyrano0521 private msg quote post Address this user | |
| I use 4 mil Archival Mylars after putting comics in regular bags with “normal” boards. | ||
| Post 18 • IP flag post | ||
|
Collector
|
etapi65 private msg quote post Address this user | |
| A little off-topic, has anyone tried the non-archival e.gerber products? Or know if they have those in-stock? I tried to swear off non-mylar, but the difficulty in acquiring them now that I have the money to purchase more is leaving me in a bit of a bind. | ||
| Post 19 • IP flag post | ||
 Collector
|
Reelgee private msg quote post Address this user | |
| @AWES10 i have some GA (Silver/Golden Comics - fits 775)egerber mylars if u want. about 2 or 3 hundred if u like | ||
| Post 20 • IP flag post | ||
 Not trying to be an ass since February 12, 2020.
|
HulkSmash private msg quote post Address this user | |
| You can still get Mylites at the standard prices directly from EGerber if you’re ok with buying in bulk and waiting for any back orders they may have. | ||
| Post 21 • IP flag post | ||
|
Collector
|
Darkseid_of_town private msg quote post Address this user | |
| Last I had from E gerber all orders were being done as pre-orders, filled in order as product becomes availible and with a backlog of at least 4-6 months...... | ||
| Post 22 • IP flag post | ||
 Hello, my name is Stu and I'm a shill.
|
HexView private msg quote post Address this user | |
Quote:Originally Posted by cyrano0521 That's a total waste of a Mylar. You're defeating the whole purpose of using Mylar  |
||
| Post 23 • IP flag post | ||
 I blame the forum gremlins.
|
figment private msg quote post Address this user | |
Quote:Originally Posted by Byrdibyrd I've sold several batches of gently used 4mm mylar sleeves on eBay after the books in them went off for grading. Had them listed at $15 (plus shipping) for 25 silver sized or 20 gold sized. They didn't last long. |
||
| Post 24 • IP flag post | ||
|
Collector
|
Bobashek private msg quote post Address this user | |
| I called egerber and they told me I could not do a pre-order until April. I have 2 packages of mylites 2 curr, just need full backs. | ||
| Post 25 • IP flag post | ||
|
Collector
|
Darkseid_of_town private msg quote post Address this user | |
| Someone should post the thread from a year ago when I tried to warn people ugh | ||
| Post 26 • IP flag post | ||
|
Collector
|
Reelgee private msg quote post Address this user | |
@HexView Quote:Originally Posted by HexViewhow so?? |
||
| Post 27 • IP flag post | ||
|
Collector
|
etapi65 private msg quote post Address this user | |
Quote:Originally Posted by Reelgee The mylars and boards (half-back or full backs) are specifically created to not damage your comic. The bags are made of a Dupont created polyester (type of polyethylene, more specifically BoPET). No acid, no degassing, gas impermeable and should essentially never break down as long as not left in direct sunlight for extremely long periods of time. The boards are specifically manufactured to be pH neutral and not degas as a result of chemicals used in the production. "Normal" bags are a polypropylene which is gas permeable and degrades over time (they get wavy). Though still considered archival material, there's a protection drop-off and the bags have to be replaced regularly (I'd say no longer than 10 years, but probably every 5). Traditional, cheap boards, degas all kinds of chemicals over sub-decadal scales that can damage comics. The issue I see with your method is actually the board you're using. A polyethylene bag in a mylar should still get the mylar protection from gas permeability. But since it's gas impermeable trapped inside the mylar, you shouldn't be locking it in there with a non-archival board that's degassing chemicals into the system. Of course, there's an ongoing discussion about comics that also degas chemicals from the ink/paper used (particularly moderns, the paper quality is...questionable at best). Lock those into something that's fully archival and don't give them a chance to degas chemicals from manufacturing could negatively impact the material, long-term. I would never put a brand new comic in a mylar; needs time to breath and release the highest chemical concentrations first. The ink is also crap quality and the "shiny" side of normal boards is less harsh for color rubs if the back cover is colored. Having some time of "storage period" in cheaper bag/board combo for modern comics may let them degas and allow the ink to better set before putting them in the mac-daddy archival materials. How long? No idea, anyone here a chemist? |
||
| Post 28 • IP flag post | ||
 I wish I had a title.
|
ComicNinja0215 private msg quote post Address this user | |
| I'm gonna check Ebay. Gonna need some for the books I just bought. | ||
| Post 29 • IP flag post | ||
|
Collector
|
Reelgee private msg quote post Address this user | |
thanks for the intel very helpful, the reason i ask is that i started rebagging my books and i did find that i have some still in bag 30 plus old some was like you said ink imprint on boards, bags yellow, books stuck together,books were bending creating spine tics.after some research i decided to go with 2mil mylar from bcw and their boards. then i found egerber and found it was cheaper per 1000 bags so i change to them but kept bcw boards. i got samples of egerber boards and found that putting two bcw together was thicker than egerber fullback didnt stop to think about the gas stuff in the mylar bags plus i like how they look with the books.So i guess my question to u is bcw boards up to par in your opinion, and what if you mix the two(full/half back front, bcw back)to get more thickness just curious.   |
||
| Post 30 • IP flag post | ||
This topic is archived. Start new topic?