Ultra-PRO® Magnetic One-Touch® Comic Holder3620
Pages:
1
 COLLECTOR
|
DarthLego private msg quote post Address this user | |
| Has anyone seen or used these yet? Ultra-PRO® Magnetic One-Touch® Comic Holder -Holds one comic book -Outside: 7-7/8 x 12-1/4" -Inside: 7-1/2 x 10-7/8" -Laboratory tested UV Protection -Magnetic Closure -Ultra Clear -Diamond Corners & Frosted Borders -Sawtooth Hanger Built in to case These are priced similar to the Comic Skin holders. https://www.bagsunlimited.com/category/393/comic-toploader    |
||
| Post 1 • IP flag post | ||
 Collector
|
MightyMutt private msg quote post Address this user | |
| They suck so bad. U need to buy the protective insert for them. Sold seperate of course. Then the insert does not fit correctly. | ||
| Post 2 • IP flag post | ||
|
COLLECTOR
|
DarthLego private msg quote post Address this user | |
| From the interior dimensions listed it seems they would hold a book bagged and boarded. | ||
| Post 3 • IP flag post | ||
|
Collector
|
MightyMutt private msg quote post Address this user | |
| They require the comic preserver specifically. The number for it is 81762. I got these and truth is the case is great but the bags it needs are really bad | ||
| Post 4 • IP flag post | ||
 Collector
|
Mef private msg quote post Address this user | |
| I only want this if I can put a bagged and boarded Mylite 2 in there.. thanks for the caveat @MightyMutt | ||
| Post 6 • IP flag post | ||
|
COLLECTOR
|
DarthLego private msg quote post Address this user | |
| The inside well is 7-1/2 x 10-7/8, I don't imagine a problem fitting a bag and board. | ||
| Post 7 • IP flag post | ||
 Collector
|
jrs private msg quote post Address this user | |
| "Nobody wants a faded cova!" In all seriousness, it looks pretty cool. |
||
| Post 8 • IP flag post | ||
|
Collector
|
MightyMutt private msg quote post Address this user | |
| I happen to have some mylite 2 and a spare case. I will try that and get back to u shortly | ||
| Post 9 • IP flag post | ||
|
Collector
|
MightyMutt private msg quote post Address this user | |
| So I tried the my lite 2. The current mylite 2 with board is to narrow to fit inside this case. There is approximately 3/8 of an inch free space on the top and bottom. | ||
| Post 10 • IP flag post | ||
|
Collector
|
Mef private msg quote post Address this user | |
| I'm more worried about the pressure on the book with the board and bag, is the magnetic closure still fairly easy with the bag and board, if so the gap isn't necessarily an issue, but if the comic isn't snug in that position that's an issue too! | ||
| Post 11 • IP flag post | ||
|
COLLECTOR
|
DarthLego private msg quote post Address this user | |
| If these are used as wall hanging displays the free space is less of an issue because they aren't getting shook around. | ||
| Post 12 • IP flag post | ||
|
Collector
|
MightyMutt private msg quote post Address this user | |
| The pressure on the book is actually not bad and the magnets hold fine. My issue was that the mylite was loose in the slab that if it got moved or handled the bag would slide around. The mylite does "fit" but is not a perfect fit. | ||
| Post 13 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?